top of page
Atomos Shinobi II Monitor

Shinobi II On-Camera Monitor

ATOMOS Shinobi II: Slimmer. Brighter. Camera control.
 
The Shinobi II is the slim, lightweight, high brightness, 5-inch 1500nit HDR monitor  from ATOMOS that’s perfect for vloggers, creatives and photographers. This device is the next generation of Atomos's first stand-alone small monitor, features a slimline case with 30% thinner design and a 50% brighter screen.
 
Perfect for video and photography
 
Shinobi II will run all day on a single battery and offers a host of professional monitoring features. Set up your shots accurately using our advanced histograms, waveforms and videoscopes. A multi-tool Analysis View gives you all the essential info at a glance. There’s even a selfie Mirror Mode for vloggers. Shinobi II is the perfect accessory to improve any photo or video production.
    • Camera Control: Thanks to the addition of the USB-C connection and intuitive, on-screen sliders, you can power your camera; adjust white balance, lens aperture, shutter speed/angle and ISO. Which brands?
      • Canon
      • Fujifilm
      • Nikon
      • Panasonic
      • Sony
      •  Cameras from OM System and SIGMA will be supported with future firmware updates.
    • Touch to  Focus: AtomOS 11.03.00 adds the ability to set the camera’s focus point directly via the touch screen. Campatible cameras include:
      • Canon: EOS R6 Mark II, EOS R1, EOS R5 Mark II & EOS R7
      • Fujifilm: GFX100 II & X-S20
      • Nikon: Z9 & Z8
      • Panasonic: LUMIX S5 II & LUMIX S5 II X
      • Sony: A7 IV, A7S III, ZV-E10 II, FX3 & FX30
    • Shutter Release: Allows photo capture triggering directly from the Shinobi II’s touchscreen
    • 1500 Nits: Sharp, 1500 nit, high-brightness screen
    • Analysis Mode: Monitor using the waveform, histogram & vectorscope tools simultaneously
    • Frame Guides: Frame shots with confidence, for social media or cinematic productions
    • 4K Monitoring: Monitor HDMI signals up to 4Kp30
    • Built-In LUT: Preview your look & store up to 8 LUTs
  • PHYSICAL  

    Dimensions

    (W x H x D)

    Without locking cable adaptor

    mm: 151mm x 91.5mm x 20.8 mm

    inches: 5.94" x 3.6" x .82"

     

    With locking cable adaptor

    mm: 151mm x 91.5mm x 28.5 mm

    inches: 5.94" x 3.6" x 1.12"
    Weight 210g / 7.4oz
    Mounting Points

    Bottom: 1 x 1/4-inch 20 with anti-rotational points
    ENVIRONMENTAL  
    Ambient Operating Temperature

    °C: Up to 40

    °F: Up to 104
    CONSTRUCTION  
    Body ABS Polycarbonate Plastic
    Cooling Passive heat sink
    Touch Screen Capacitive Touch
    POWER  
    Input Voltage 6.2V to 16.8V
    Compatible Batteries 1 x NP-F / L-Series
    DC in Connector Via Battery Eliminator (sold separately)
    DISPLAY  
    Display Panel SuperAtom IPS Panel (Capacitive Touch)
    Size 5.2"
    Resolution 1920 x 1080
    PPI 427
    Bit Depth 10-Bit (8+2 FRC)
    Backlight Type Edge-Lit
    Brightness (cd/m² / nits) 1500
    Aspect Ratio 16:9
    Color Gamut Rec.709
    Calibration Support Atomos Calibrator on PC/Mac with Calibrite ColorChecker Display Pro & ColorChecker Display Plus + Simple on-device calibration (connect Calibrite probe directly to Shinobi II via USB-C)
    VIDEO INPUT  
    HDMI 1 x HDMI (1.4)
    Bit Depth 8/10-Bit for Video / up to 12-Bit for RAW
    Chroma Subsampling YCbCr 4:2:0 & 4:2:2
    AUDIO IN/OUT  
    HDMI Embedded 2-channel, 24-bit, input dependent
    Headphone Out 3.5mm headphone jack, 2-channel
    EXTERNAL DEVICE CONTROL  
     

    USB-C: Camera control for supported cameras via USB-C. Controllable functions: Record Trigger, White Balance, Shutter Speed, Shutter Angle (if supported by camera), Aperture, ISO, Camera Overlays, Record Indicator

     

    Serial 2.5mm Jack:  Camera control for Z CAM cameras via optional USB to Serial Cable

     

    Visit ATOMOS to view the technical specs in full.

bottom of page