| VIDEO |
|
|
| Inputs |
3G-SDI SMPTE 424M standard / 75 Ω (BNC x 1)
1 x HDMI 1.4b Type-A receptacle
|
|
| Outputs |
3G-SDI SMPTE 424M standard / 75 Ω (BNC x 1) |
3G-SDI SMPTE 424M standard / 75 Ω (BNC x 1)
1 x HDMI 1.4b Type-A receptacle
|
| SDI Ancillary Data Support |
Supports transmitting metadata, timecode, and start/stop flags from most camera manufacturers. |
Supports reading metadata, timecode, and start/stop flags from most camera manufacturers. |
| Color Sampling |
SDI: YCbCr 4:2:2, 10-bit
HDMI: RGB/YCbCr 4:4:4 8-bit, 4:2:2 10-bit
|
SDI: YCbCr 4:2:2, 10-bit
HDMI: RGB/YCbCr 4:4:4 8-bit, 4:2:2 10-bit
|
| Delay TX to RX |
<0.001sec |
<0.001sec |
| Input Cross Conversion |
Yes, HDMI to SDI (4Kp23.98-30 HDMI input is scaled and looped out as 1080p23.98-30 on SDI loopout) |
|
| Output Video Scaling |
|
External Antenna: No manual settings, but all signals above 4K30 for HDMI and 1080p60 for SDI are scaled down to 1080p for corresponding output
Internal: No (4Kp30 signals are output on HDMI, but scaled to 1080p30 and output over SDI. 4Kp60 signals received from Bolt 6 XT devices are scaled to 1080p60 and output over both HDMI and SDI outputs)
|
| Supported Resolutions |
4Kp23.98/24/25/29.97/30 (HDMI only)
1080p23.98/24/25/29.97/30/50/59.94/60
1080psf23.98/24/25/29.97/30
1080i50/59.94/60
720p50/59.94/60 |
4Kp23.98/24/25/29.97/30 (HDMI only)
1080p23.98/24/25/29.97/30/50/59.94/60
1080psf23.98/24/25/29.97/30
1080i50/59.94/60
720p50/59.94/60 |
| Video Compression |
Visually Lossless |
Visually Lossless |
| Color Correction |
None |
External Antenna: 17x17x17 3D LUT (supports 10-bit color)
Internal Antenna: None
|
| AUDIO |
|
|
| Compression |
48kHz 24-bit PCM |
48kHz 24-bit PCM |
| Inputs |
Embedded SDI/HDMI Audio Input (2 Channel) |
|
| Outputs |
|
Embedded SDI/HDMI Audio Input (2 Channel) |
| PHYSICAL |
|
|
| Dimensions |
External Antenna
mm: 60 x 103 x 33
inches: 2.36 x 4.06 x 1.3
Internal Antenna
mm: 72 x 119.8 x 33.1
inches: 2.83 x 4.72 x 1.3
|
External Antenna
mm: 122 x 94 x 27
inches: 4.8 x 3.7 x 1.06
Internal Antenna
mm: 122.4 x 106.2 x 27.1
inches: 4.8 x 4.2 x 1.0
|
| Weight |
External Antenna
g: 206
oz: 7.3
Internal Antenna
g: 212
oz: 7.5
|
External Antenna
g: 292
oz: 10.3
Internal Antenna
g: 304
oz: 10.7
|
| Construction |
Milled Aluminum(Chassis) and regulation-compliant PCB |
Milled Aluminum(Chassis) and regulation-compliant PCB |
| Mountability |
Multiple mounting options with 1/4"x20 and M3 holes |
Multiple mounting options with 1/4"x20 and 3/8"x16 holes |
| INTERFACES |
|
|
|
Configuration
|
OSD with Menu, Joystick Navigation |
OSD with Menu, Joystick Navigation |
| Switches |
On/Off Switch |
On/Off Switch |
| USB |
Upgrade via Micro-USB |
Upgrade via Micro-USB |
| Bluetooth |
2.4 GHz |
2.4 GHz |
| NETWORK |
|
|
| Antennas |
2 External 2dBi antennas (included) or
4x Internal 2dBi Antennas
|
5 External 2 dBi antennas (included) or
4x Internal 2dBi Antennas
|
| Wireless |
Non-DFS Frequencies:
5.190 ~ 5.230 GHz, 5.755 ~ 5.795 GHz, 5.945 ~ 6.425GHz
DFS Frequencies:
5.270 ~ 5.670 GHz |
Non-DFS Frequencies:
5.190 ~ 5.230 GHz, 5.755 ~ 5.795 GHz, 5.945 ~ 6.425GHz
DFS Frequencies:
5.270 ~ 5.670 GHz |
| RF Channel Selection |
Auto, Manual |
Auto, Manual |
| Encryption |
AES-256, RSA-1024 key exchange |
AES-256, RSA-1024 key exchange |
| RF Power |
23 dbm EIRP |
21 dbm EIRP |
| Range |
Up to 750 ft, line of sight |
Up to 750 ft, line of sight |
| Unicast Multicast |
Can connect one Transmitter to up to 6 Receivers |
Can connect one Transmitter to up to 6 Receivers |
| Noise Rejection |
Can coexist with WiFi and 5GHz cordless phones
Can operate up to 6 sets in same location |
Can coexist with WiFi and 5GHz cordless phones
Can operate up to 6 sets in same location |
| POWER |
|
|
| Input |
2-Pin Circular locking Connector 6-28 VDC |
2-Pin Circular locking Connector 6-28 VDC |
| Battery |
None, optional Sony/Canon dual battery plate |
None, optional Gold or V mount battery plate |
| Nominal Power Consumption |
9 Watts |
11 Watts |